SAS 4i plug, R/A TH
SCSI Products » 3Gb/s Archives
SAS 4i plug, R/A TH
SAS 4i plug, Vertical Pressfit
SAS BACKPLANE RECEPT, VERTICAL, Hybrid
SAS HDD Receptacle, Vertical
SAS HDD Receptacle, Vertical
SAS HDD Receptacle, Vertical
SAS PLUG 15+7+7P ASSEMBLY
SAS BACKPLANE RECEPT, VERTICAL, Pressfit
SAS HDD Receptacle, Vertical
SAS BACKPLANE RECEPT, VERTICAL, Pressfit
SAS PLUG 15+7+7P,0.96mm OFFSET
ASSY, SAS PLUG, SMT, 15+7+7P
SAS HDD Receptacle, Vertical, Ext Height, Press-Fit
The Ultrastar C10K300 drive saves you money on your cooling costs. Compared to its 3.5-inch sibling, power consumption is reduced by up to 65%. Advanced Power Management feature with multi-state idle modes maintains compatibility with T10 direction and can be pre-programmed or manually initiated in the system. In keeping with the Hitachi tradition of respecting the environment, the Ultrastar C10K300 drive also boasts halogen-reduced components that are earth friendly. These eco-friendly features qualify the C10K300 for the EcoTrac classification.
Ultrastar™ C10K600 is a 2.5-inch 10,000 RPM hard drive that leads the industry with 18% faster sequential and up to 15% random performance than the nearest competitor. The high-performance SAS 6Gb/s interface delivers data reliability, availability and scalability and is the only small form factor SAS drive in the industry to pack a 64MB cache buffer to optimize the read/write response time.
The Ultrastar C15K146 completes the Hitachi portfolio of performance drives for Enterprise-class applications in the mission critical storage tier, This 15,000 RPM, small form factor drive is ideal for high-performance 24x7 Enterprise applications. Compared to similar 3.5-inch drives from Hitachi, sequential performance is 29% higher, and 11% higher when compared to its 10K RPM sibling. The 64MB cache buffer is the largest available in its class in the industry. In addition, Advanced Power Management technology optimizes power consumption which can lower data center energy usage and cooling costs. This drive uses 50% less power than similar 3.5-inch drives in the Hitachi lineup. The Ultrastar C15K147 drive is designed on the same platform as its 10K RPM sibling to reduce qualification time.
The Ultrastar 15K600 combines ultimate performance with high capacity in a single drive, storing up to 600GB of data while spinning at 15,000 RPM. That amounts to a capacity growth of 33% over its predecessor to keep pace with digital data growth and improve space efficiency in today's data centers. At the same time, sequential performance increased by 23% compared to prior generation to keep data moving faster. The 64MB cache buffer is the largest in the industry in its class. The 6Gb/s Serial Attached SCSI (SAS) and 4Gb/s Fibre Channel Arbitrated Loop (FCAL) interfaces support the reliability required in the most demanding enterprise computing environments like on-line transaction processing, intensive data analysis, multi-user applications and data warehousing.
The Hitachi Ultrastar 7K3000 is the world's first and only 7200 RPM hard drive targeted at 2.0 million hours MTBF and backed by a full five-year warranty. Available in 3TB and 2TB capacities, the Ultrastar 7K3000 represents the fifth-generation Hitachi 5-platter mechanical design and has been field proven by top server and storage OEMs as well as leading Internet giants.
The Ultrastar family delivers the highest sequential throughput reaching 100 times faster than HDD's, SSDs enable rapid access to "hot" enterprise data for improved productivity and operational efficiency. The Ultrastar family offer significant value in terms of IOPs per Watt, while reducing total cost of ownership (TCO) through lower power consumption, efficient cooling and reduced space requirements.
The LSISAS31601E is a full height Gen1 PCIe to 16-port 3Gb/s SAS Host Bus Adapter (HBA) with four external x4 SAS connector (SFF-8088).
The LSISAS3801X is a low-profile 64-bit, 133MHz PCI-X to 8-port 3Gb/s SAS Host Bus Adapter (HBA) with two external x4 SAS connector (SFF-8088).
The LSISAS3801E is a low-profile Gen1 PCIe to 8-port 3Gb/s SAS Host Bus Adapter (HBA) with two external x4 SAS connector (SFF-8088).
The LSISAS3442X-R is a low-profile 64-bit, 133MHz PCI-X to 8-port 3Gb/s SAS Host Bus Adapter (HBA) with one internal x4 SAS connector (SFF-8484) and one x4 external SAS connector (SFF-8470) with Integrated RAID 0, 1 & 1E support.
The LSISAS3442E-R is a low-profile Gen1 PCIe to 8-port 3Gb/s SAS Host Bus Adapter (HBA) with one internal x4 SAS connector (SFF-8484) and one external x4 SAS connector (SFF-8470) with Integrated RAID 0, 1 & 1E support.
The LSISAS3041X-R is a low-profile 64-bit, 133MHz PCI-X to 4-port 3Gb/s SAS Host Bus Adapter (HBA) with four internal x1 SATA connector with Integrated RAID 0, 1 & 1E support.
The LSISAS3080X-R is a low-profile 64-bit, 133MHz PCI-X to 8-port 3Gb/s SAS Host Bus Adapter (HBA) with two internal x4 SAS connector (SFF-8484) with Integrated RAID 0, 1 & 1E support.
The LSISAS3041E-R is a low-profile Gen1 PCIe to 4-port 3Gb/s SAS Host Bus Adapter (HBA) with four internal x1 SATA connectors with Integrated RAID 0, 1 & 1E support.
The LSISAS3081E-R is a low-profile Gen1 PCIe to 8-port 3Gb/s SAS Host Bus Adapter (HBA) with two internal x4 SAS connector (SFF-8484) with Integrated RAID 0, 1 & 1E support.
28-port 3Gb/s SAS Expander Supports 1.5 and 3 Gb/s SAS and SATA data transfer rates per port; zoning; integrated enclosure management
36-port 3Gb/s SAS Expander Supports 1.5 and 3Gb/s SAS and SATA data transfer rates per port; zoning; integrated enclosure management
12-port SAS expander Supports 1.5 and 3 Gb/s data transfer rates per port; 12 fully-independent ports support direct, subtractive, and table-routed configurations as well as initiator or target connect
PCI Express to 8-port SAS Controller IC based on Fusion-MPT architecture Supports 1.5 and 3 Gb/s data transfer rates per port; Integrated RAID 0, 1, 1E
PCI-X to 8-port SAS Controller IC based on Fusion-MPT architecture Supports 1.5 and 3 Gb/s data transfer rates per port; Integrated RAID 0, 1, 1E
PCI Express to 4-port SAS controller IC based on Fusion-MPT architecture. Supports 1.5 and 3 Gb/s data transfer rates per port; Integrated RAID 0, 1, 1E
PCI-X to 4-port SAS controller IC based on Fusion-MPT architecture. Supports 1.5 and 3 Gb/s data transfer rates per port; Integrated RAID 0, 1, 1E
The Intel® RMS2AF080 offers exceptional data protection and configuration flexibility. Designed for a wide selection of Intel® Server Boards, this SAS/SATA RAID module offers features including a native PCI Express* 2.0 architecture help to deliver essential performance for 3Gb/s and 6Gb/s drive-based solutions. The Intel RMS2AF080 allows businesses using entry-level servers and workstations to employ robust RAID functionality at lower prices than enterprise-class RAID adapters.
The Intel® Integrated Server RAID Module SROMBSASMR offers intelligent RAID protection for servers using SAS or SATA hard drives. Designed specifically for select Intel® server boards, this SAS/SATA RAID module communicates with the host system through a custom PCI Express* board-to-board interface. With the popularity of rack-dense 1U and 2U servers increasing, this design allows system builders to easily implement a robust RAID solution without sacrificing a valuable riser-card slot.
The Intel® Integrated Server RAID Module RMS2MH080 (AXXRMS2MH080), offers intelligent RAID protection for servers using SAS or SATA hard drives. Designed specifically for selected Intel® Server Boards, this SAS/SATA RAID module communicates with the host system through a custom board-to-board PCIe 2.0 interface. This design allows system builders to easily implement a robust RAID solution without sacrificing a valuable riser-card slot or using a chassis with low-profile add-in card cut-outs.
The economical Intel® RAID Controller SASWT4I offers exceptional entry-level hardware SAS/SATA RAID and non-RAID data off-load for server systems and workstations. This RAID controller allows for point-to-point connections with a SAS universal interconnect interface allowing for 1.5 and 3 Gb/s SATA hard disk drives along with logical SCSI compatibility for the extra reliability and manageability that SAS drives provide.
The Intel® RAID Controller SASUC8I is ideal for servers and workstations needing high-speed data transfer with the option for entry-level hardware RAID data protection. This RAID controller allows for point-to-point connections with a SAS universal interconnect interface allowing for 1.5 and 3Gb/s SATA hard disk drives along with logical SCSI compatibility for the extra reliability and manageability that SAS drives provide.
The Intel® RAID Controller SRCSASRB is one in a family of Intel first-generation RAID solutions to use RAID-On-Chip (ROC) technology.
The SRCSASRB is also highly flexible. An important feature is the high-performance multiplexer (MUX) which allows configuring of eight ports for internal or external use, or both. Solutions can be built for up to 240 disks, using high-performance SAS disks or high-capacity SATA drives--or a combination of each.
The Intel® RAID Controller SRCSASLS4I provides high-performance, cost-effective data protection. With expander support it is excellent for systems using expander backplanes and up to 16 SAS or SATA hard drives. The SRCSASLS4I has a low profile MD2 compliant size that allows it to fit in systems of many form factors.
The Intel® RAID Controller SRCSASBB8I offers hardware RAID data protection and high design flexibility. It has a low profile MD2 size that allows use within servers of many form factors and with either SAS or SATA drives. Support for RAID 6 ensures data integrity, even if two drives fail simultaneously.
The Intel® RAID Controller RS2PI008, part of the Intel portfolio of 6Gb/s SAS adapters, offers unprecedented performance with exceptional data protection and design flexibility. Features including a native PCI Express* 2.0 architecture technology allow for significant performance gains for both 3Gb/s and 6Gb/s drive-based solutions. Data protection and availability are enhanced by new features including decision-feedback equalization for greater signal integrity, enhanced diagnostics, and more robust error reporting.
The Intel® RAID Controller RS2BL040, a member of Intel's 6Gb/s SAS adapter family, is targeted at solutions with expander backplanes or low drive counts. Features including a native PCI Express* 2.0 architecture allow for significant performance gains for both 3Gb/s and 6Gb/s drive-based solutions versus prior generation RAID adapters. Data protection and availability are enhanced by new features including Decision Feedback Equalization for greater signal integrity, enhanced diagnostics, and more robust error reporting.
The Intel® RAID Controller RS2BL080 offers unprecedented performance with exceptional data protection and design flexibility. Features such as a native PCI Express* Generation 2 architecture allow for significant performance gains for both 3Gb/s and 6Gb/s drive-based solutions. Data protection and availability are enhanced by new features including Decision Feedback Equalization for greater signal integrity, enhanced diagnostics, and more robust error reporting.
The Intel® RAID Controller RS2WC040 includes features such as a native PCI Express* 2.0 architecture to deliver essential performance for 3Gb/s and 6Gb/s drive-based solutions. The Intel RAID Controller RS2WC040 allows businesses using workstations and entry-level servers to employ robust RAID functionality at lower prices than enterprise-class RAID adapters.
The Intel® RAID Controller RS2WC080 includes features such as a native PCI Express* 2.0 architecture to deliver essential performance for 3Gb/s and 6Gb/s drive-based solutions. The Intel RAID Controller RS2WC080 allows businesses using workstations and entry-level servers to employ robust RAID functionality at lower prices than enterprise-class RAID adapters.
The Intel® RAID Controller RS2MB044, part of Intel's portfolio of 6Gb/s SAS adapters offers unprecedented performance with exceptional data protection and design flexibility. With four internal and four external ports, the Intel RAID Controller RS2MB044 supports both internal drive storage and external JBOD expansion. Using the external SAS ports, multiple JBODs can be connected to a server, providing a scalable and affordable solution for growing storage requirements.
The Intel® RAID Controller RS2WG160, with sixteen internal ports, connects up to 16 drives inside the server via direct connection or passive backplane. The Intel RAID Controller RS2WG160's architecture delivers support for data transfer rates of up to 6Gb/s per port, and brings new features and improved performance regardless of whether the storage solution utilizes 3Gb/s or 6Gb/s SAS or SATA drives.
The Intel® RAID Controller RS2SG244 supports both internal drive storage and external JBOD expansion for up to 240 SATA or SAS drives. The Intel RAID Controller RS2SG244 connects up to 24 drives inside the server via direct connection or passive backplane. Using the external SAS ports, multiple JBODs can be connected to a server, providing a scalable and affordable solution for growing storage requirements.
