General Company Information
Company Name *
Bill To Invoice Information
Full Name *		E-Mail *
Phone Number *	Ext.	Fax Number *
Company Address *		City *
State/Province *		ZIP/Postal Code *
We are accepting Credit Card Payments. A processing form will be required. After you have filled out the registration form an option will appear for Credit Card Payments. Click on it and Fax it in.
Company to sponsor Plugfest Reception?: No Yes
Equipment Information: (Vendors are expected to bring their own SCSI Cables)
Product One: Product Name: * Product Type: * Optional Description Quanity: * Type of Connectors/Cables? *		Product Two: Product Name: Product Type: Optional Description Quanity: Type of Connectors/Cables?
Product three: Product Name: Product Type: Optional Description Quanity: Type of Connectors/Cables?		Product four: Product Name: Product Type: Optional Description Quanity: Type of Connectors/Cables?
Additional Information:
Attendee Information
Full Name: *		E-Mail: *
Phone Number: *		Check one: Employee Consultant *
Dates Attending: *
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address: *		City: *
State/Province *		Zip/Postal Code: *
Participant #2
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:
Participant # 3
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:
Participant #4
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:
Participant #5
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:
Participant #6
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:
Participant #7
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:
Participant #8
Full Name:		E-Mail:
Phone Number:		Check one: Employee Consultant
Dates Attending:
Dietary Needs: Vegetarian non-Vegetarian
Please fill in the following information if different from above information
Address:		City:
State/Province		Zip/Postal Code:

Questionnaire
If you are bringing enclosures, please answer the following questions: It order to plan properly for the SAS Plugfest we are trying to collect some information related to enclosures that you are planning to bring. Please provide this information right away. This information will not be shared with anyone other than Mike Fitzpatrick (SAS Plugfest Technical Committee Chair) and the UNH planning team.
1) How many enclosures are you planning to bring to the plugfest?
2) How many drives will each enclosure hold?
3) Will your enclosures hold (check appropriate answer)?	a) 3.5" drive only b) 2.5" droves only c) accept either 2.5" or 3.5" drives
4) Will your enclosures/expanders support (check appropriate answer)?	a) SAS only devices b) SATA only devices c) Either SAS or SATA devices
5) Does your enclosure support dual port or single port?	Dual Port Single Port
6) Can your enclosures be cascaded?
7) Does your enclosure have built in expanders? YES NO
8) Please explain the type of input cables required (from host to subsystem), e.g. external 4 lane, external 2 lane, internal 4 lane, etc.
9) Please explain the type of cable to cascade enclosures (from enclosure to down stream enclosure).
10) Are you planning to bring your own cables? YES NO Is so, will you bring enough to attached all of your enclosures? YES NO

PHY CONFIGURATION
Can your device modify Emph and Drive Strength?
Can your device Loop Tx data out Rx without re-clocking the data?
Can your device provide Phy Error counts (Disparity, Invalid Words etc…)
Can your device modify receiver equalization?
Can your TX source a common pattern (PRBS, CJTPAT, Align, Clock)?
Can your RX accept a common pattern and check for bit errors in the pattern? If so, what patterns are supported?
Can you adjust phy capabilities in the SNW-3 window?
Can your device be configured to transmit using the following PHY configurations? Check all that apply:
SNW-2 based 3 Gbps (i.e. legacy 3 Gbps) SNW-2 based 3 Gbps (i.e. legacy 3 Gbps) with multiplexing SNW-3 based 1.5 Gbps no SSC tx/rx SNW-3 based 3 Gbps no SSC tx/rx SNW-3 based 3 Gbps no SSC tx/rx with multiplexing SNW-3 based 6 Gbps no SSC tx/rx SNW-3 based 6 Gbps no SSC tx/rx with multiplexing SNW-3 based 1.5 Gbps with SSC tx/rx down spreading SNW-3 based 1.5 Gbps with SSC tx/rx center spreading SNW-3 based 3 Gbps with SSC tx/rx down spreading SNW-3 based 3 Gbps with SSC tx/rx center spreading SNW-3 based 3 Gbps with SSC tx/rx with multiplexing down spreading SNW-3 based 3 Gbps with SSC tx/rx with multiplexing center spreading SNW-3 based 6 Gbps with SSC tx/rx down spreading SNW-3 based 6 Gbps with SSC tx/rx center spreading SNW-3 based 6 Gbps with SSC tx/rx with multiplexing down spreading SNW-3 based 6 Gbps with SSC tx/rx with multiplexing center spreading SATA 1.5 Gbps no SSC tx SATA 3 Gbps no SSC tx SATA 6 Gbps no SSC tx SATA 1.5 Gbps with SSC tx SATA 3 Gbps with SSC tx SATA 6 Gbps with SSC tx
Can your device be configured to receive a signal with the following PHY configurations? Check all that apply:
SNW-2 based 3 Gbps (i.e. legacy 3 Gbps) SNW-2 based 3 Gbps (i.e. legacy 3 Gbps) with multiplexing SNW-3 based 1.5 Gbps no SSC tx/rx SNW-3 based 3 Gbps no SSC tx/rx SNW-3 based 3 Gbps no SSC tx/rx with multiplexing SNW-3 based 6 Gbps no SSC tx/rx SNW-3 based 6 Gbps no SSC tx/rx with multiplexing SNW-3 based 1.5 Gbps with SSC tx/rx down spreading SNW-3 based 1.5 Gbps with SSC tx/rx center spreading SNW-3 based 3 Gbps with SSC tx/rx down spreading SNW-3 based 3 Gbps with SSC tx/rx center spreading SNW-3 based 3 Gbps with SSC tx/rx with multiplexing down spreading SNW-3 based 3 Gbps with SSC tx/rx with multiplexing center spreading SNW-3 based 6 Gbps with SSC tx/rx down spreading SNW-3 based 6 Gbps with SSC tx/rx center spreading SNW-3 based 6 Gbps with SSC tx/rx with multiplexing down spreading SNW-3 based 6 Gbps with SSC tx/rx with multiplexing center spreading SATA 1.5 Gbps no SSC tx SATA 3 Gbps no SSC tx SATA 6 Gbps no SSC tx SATA 1.5 Gbps with SSC tx SATA 3 Gbps with SSC tx SATA 6 Gbps with SSC tx
ZONING SUPPORT
Select SMP device type: SMP Initiator or SMP Target
Are the SAS addresses of your devices unique across all devices entering the Large Build?
List the SAS addresses of the devices you will be bringing to the Large Build
Does your device perform discovery?
Does your device understand SAS-2 SMP requests? (ie, filling out response allocation field in SMP header, DiscoverList, new zoning SMP's...etc..)
Can your device provide a route table report of your entries?
Can your device also provide the zone group of your phys and entries?
Can your device handle "Inside ZPSD" scenarios?
If your device is an SMP Intiator, please indicate which commands your device can be configured to transmit, check all that apply:
DISCOVER REPORT GENERAL DISCOVER LIST REPORT ZONE PERMISSION TABLE ZONED BROADCAST ENABLE DISABLE ZONING ZONE LOCK ZONE ACTIVATE ZONE UNLOCK CONFIGURE ZONE PERMISSION TABLE CONFIGURE ZONE MANAGER PASSWORD CONFIGURE ZONE PHY INFORMATION PHY CONTROL
If your device is an SMP Target, please answer the following questions:
Default Zoning Password Respond correctly to received DISCOVER? Respond correctly to received REPORT GENERAL? Respond correctly to received DISCOVER LIST? Respond correctly to received REPORT ZONE PERMISSION TABLE? Respond correctly to received ZONED BROADCAST? Respond correctly to received ENABLE DISABLE ZONING? Respond correctly to received ZONE LOCK Respond correctly to received ZONE ACTIVATE Respond correctly to received ZONE UNLOCK Respond correctly to received CONFIGURE ZONE PERMISSION TABLE Respond correctly to received CONFIGURE ZONE MANAGER PASSWORD Respond correctly to received CONFIGURE ZONE PHY INFORMATION Respond correctly to received PHY CONTROL
CABLES AND CONNECTORS
Your device will support the following connector types, check all that apply:
Does your HBA or Expander support providing adequate power to Active Cables? MiniSAS (ipass) QSFP Disk Drive connector Other (describe)